Click to review tech specs for high-res cameras and high-res GPS.

Video
• One system for video and data
• Video format - NTSC4 composite video camera inputs NTSC or PAL
• Video signal and power in single locking connector
• Simultaneous dual frame recording (two MPEG encoders record two camera views full frame)
• MPEG2 resolution (704x480 video resolution)
• Built-in export software to MPEG 4 and other popular video formats
• 30 FPS recording (NTSC)
• 2.5 Mbps - 8 Mbps video bit rate user configurable
• User defined video layouts using 1 to 4 cameras (full screen, picture-in-picture)
• Video out port for camera setup

Audio
• Two-channel input for stereo audio
• Single locking connector
• Built-in Automatic Gain Control for broad range of high and low sounds
• Line level or dynamic microphone inputs

Data and Data Sources
• User-positioned map, gauges and logo overlays
• Ability to change overlays after video capture
• High-res 4Hz GPS for speed, lap #, lap times and track map
• Three axis on-board accelerometer (±6.0g range, 0.01g resolution) for Gs
• Battery voltage, box temperature recorded
• OBD-II data via USB 2.0
• WiFi ready

Race-Keeper SE
• Locking quick-release Hirose and RJ-45 connectors
• 8 multi-function analog sensor inputs (e.g., steering, throttle, brake)
• 8 multi-function digital sensor inputs (e.g., wheel speed, RPM)
• OBD-II data via USB 2.0
• CAN-ECU data input
• 2 CAN I/O ports for ECU interface

Race-Keeper HE
• Locking quick-release Hirose waterproof connectors
• 3 multi-function analog sensor inputs (e.g., steering, throttle, brake)
• 2 multi-function digital sensor inputs (e.g., wheel speed, RPM)
• 1 CAN-ECU data input
• 2 CAN I/O ports for ECU interface
 
Recording Media and Estimate Recording Times
• Removable SD card, tested up to 32GB
• Removable USB stick (Race-Keeper SE)
• Recording times dependent on size of SD card or USB stick and video resolution settings (examples below)
• Recording single stream at 2.5 Mbps for 1 hour requires approximately 1.1 GBs
• Recording single stream at 5.0 Mbps for 1 hour requires approximately 2.2 GBs
• Recording dual stream at 5.0 Mbps for 1 hour requires approximately 4.4 GBs

Membrane Panel Control Buttons
• Membrane switch panel with click and button feedback characteristics
• Power on/off
• Record/stop record
• Pause/unpause record (Race-Keeper SE)

LED indicators
• High-visibility LEDs

• Status
• Green = Read to record
• Green/red flashing = System starting
• Red flashing (after start) = No GPS

• Transfer
• Yellow/yellow flashing = System updating

• Power
• Red = Power connected
• Green = Power on

• Record
• Red = Recording
• Red flashing = Stopping recording

• Memory
• Top
• Yellow = Memory used >90% of capacity
• Red = Memory used at 100% of capacity or no USB/SD
• Three other LEDS
• Green = Memory used at >25%, >50%, >75% of capacity
 
Mechanical and Power
• Operating temperature: -20 to +55 C ambient
• Storage temperature: -20 to +75 C
• Shock: 0.25m onto hard surface, except connector face
• Vibration: 6g @ 0-1KHz random pattern
• Compliant with FCC part 15 Class B, and current CE standards
• 12v DC, 1Amp (15W max)
• Locking power connector

Race-Keeper SE
• Custom flame retardant ABS enclosure
• Width 7.35"/187mm
• Depth 4.75"/121mm
• Height (front) 1.4"/36mm
• Height (back) 2.1"/53mm
• Weight 1.1 lb/0.50kg
• USB integrated into power loom for peripheral connection

Race-Keeper HE
• IP67 waterproof connectors, enclosure and membrane panel
• Custom flame retardant ABS enclosure
• Width 7.8"/198mm
• Depth 5.5"/140 mm
• Height (back) 2.0"/51mm
• Weight 1.3 lb/0.59kg

Installation Options
• 3M dual lock Velcro (provided)
• 4-hole AMPS bolt pattern in case standard mount
• Integrated quick mounting plate (Race-Keeper HE)